MIST-PRO is designed to make spraying simple and effective, but safe use is essential. Follow these guidelines to protect yourself, your equipment, and your property.
Materials You Should Never Use
Do not use MIST-PRO with the following:
Flammable products (gasoline, diesel fuel, hydraulic oil)
Hot or boiling liquids
Thick or highly viscous materials (tar, heavy paints, stains)
Citrus-based cleaners, strong acids or bases, strong solvents, lacquers, turpentine
Products containing peanut oil, bleach, Epsom salt, mineral spirits, vinegar, or essential oils
Using these materials can damage the system or create serious hazards including fire, explosion, or injury.
Safe Operating Guidelines
Do not exceed 45 PSI with your tank sprayer.
Always wear protective gear: mask, goggles, gloves, long sleeves, and pants.
Avoid inhaling fumes or mist, and prevent contact with skin or eyes.
Never spray on or near electrical equipment or wiring.
Do not use the system during windy conditions.
Keep children, pets, and bystanders away while spraying.
Best Practices Before and After Use
Inspect your system before each use. Make sure hoses are secure and in good condition.
Test the system with water before adding any solution.
Mix chemicals outdoors on open ground, away from your blower.
Only mix enough solution for your current application.
After use, thoroughly clean and rinse the tank and spraying assembly.
Never store the system with solution inside the tank.
Do not transfer leftover spray materials to other containers.
Store chemicals in a locked, secure place away from children and animals.
Use only original Mist-Pro replacement parts for safety and reliability.
Final Note
MIST-PRO is a delivery system. The choice of solution and proper use of personal protective equipment is the responsibility of the user. Always follow chemical manufacturer instructions along with these safety practices.
